Bucket Teeth for Wheel Loader
Types of Bucket Teeth Used Place
1. General Purpose or Standard Duty Wheel Loader Bucket Teeth can be used for light, loose, well-shot material such as dirt, clay, sand, gravel, shot or friable coal or shale. Puts very little load on the Wheel Loader Equipment and uses minimum machine power.
2. Heavy Duty Wheel Loader Bucket Teeth can be used for Medium to heavy, shot material, such as rocky overburden or ore, unshot lens or partings of cemented material of rock which will easily break up into manageable sizes when excavated. Requires a moderate amount of machine power but at times can apply high loads on the equipment.
3. Extra Heavy or Severe Duty Wheel Loader Bucket Teeth can be used for Heavy ore or unshot rock, tight or slabby shot rock that requires maximum or near maximum machine power to break out. Such applications usually cause the machine to rock during the digging cycle, and many times is accompanied by smoke where the tooth engages the material. Puts maximum loads on the equipment during most of the operation.
Welcome to choose and buy Bucket Teeth for Wheel Loader, we believe that Bucket Teeth will meet your requirements. to learn more information about Bucket Teeth, please contact us. Email: [email protected]