The bucket tooth is the terminal of the working device of the excavator. In the process of excavation, the bucket tooth is the working part with the largest load and belongs to the consumable part. Especially in the stonework construction environment, the bucket tooth wear is very fast. The use of bucket teeth can directly affect the working efficiency and production cost of excavator.
When the tip part of the bucket teeth is seriously worn, the strength required by the excavator to cut in during the digging operation will increase greatly, resulting in greater fuel consumption and affecting the work efficiency. Therefore, it is necessary to replace the new bucket teeth in time when the bucket teeth loss is serious.
In the daily maintenance of excavator, take 2 minutes to check the bucket every day. The main inspection content is: the bucket body is the degree of wear and whether there are cracks. If the degree of wear is serious, reinforcement should be considered. As for the cracks in the bucket body, timely repair welding should be carried out to avoid increasing the length of the cracks due to delayed maintenance, resulting in the situation that maintenance is impossible. In addition, kick the digging bucket teeth with your feet to check whether the bucket ruler is stable. If the bucket teeth are loose, they should be tightened immediately.
Huangzuan Machinery established in 2008, is a specialized manufacturer of bucket teeth, bucket adaptor and side cutter which is used Caterpillar, Komatsu, Hyundai, Daewoo, Kobelco, Hensley, Liugong, Hitachi, XCMG, XGMA, Volvo, Esco, JCB .etc.
With production facilities covering an area of 18136 square meters and staff of 100, our annual processing capability equals approximately 12,000 metric tons. we currently have the technology of lost wax casting, precoated sand casting, resin sand casting, have the advanced instrument such as spectromaxx, Brinell hardness tester, universal testing machine, metalloscope.