2019-08-09 14:46:38

How to Select Bucket Tooth Matched with Excavator

Bucket teeth are the most vulnerable to damage in the use of the whole set of equipment. Choosing the right type can achieve twice the result with half the effort in the project and avoid unnecessary damage.


The type selection of bucket teeth can be determined according to the type of excavator. Usually excavator equipment will have a clear logo, for example, Carter 320, if not modified, you can choose the teeth, or tiger teeth, will not be wrong.


Again, it can be determined by code. Generally excavator bucket teeth will have a code, and when you buy this easy to wear parts, it is best to have an extra pair for replacement. The same code is generally generic, you can safely choose.


If it is impossible to determine the type of excavator and the code of bucket teeth, then the root of the tooth can be on. The code and model on the root of the tooth can also judge other parts.


Another possibility is that when all the data are not detailed and the code and model of excavator and various parts can not be obtained, the inner diameter, diameter, depth and length of the bucket teeth in use can be measured personally to judge the model. It should be noted that the inner diameter is measured, not the outer diameter.


  Huangzuan Machinery established in 2008, is a specialized manufacturer of bucket teeth, bucket adaptor and side cutter which is used Caterpillar, Komatsu, Hyundai, Daewoo, Kobelco, Hensley, Liugong, Hitachi, XCMG, XGMA, Volvo, JCB .etc.

 With production facilities covering an area of 18136 square meters and staff of 100, our annual processing capability equals approximately 12,000 metric tons. we currently have the technology of lost wax casting, precoated sand casting, resin sand casting, have the advanced instrument such as spectromaxx, Brinell hardness tester, universal testing machine, metalloscope.